How can I low budget to repair my cricket bat?
Cricket is a thrilling sport which is popular in many countries of the world. The game is played between two teams on a field where a batsman hits a hard ball with a bat (which is made of soft wood!), The bats are often harmed or broken during gameplay. Depending on the problem, it is possible to fix some cricket bat problems, such as cracks, but once the crack appears, it will continue to deteriorate, and eventually the bat will have to be replaced. However, if you are going to repair a crack, it is important that you know how to fix them, so that you can fix your bat at the least expense. After all, good cricket bats are expensive!
PLEASE FOLLOW THESE STEPS BY STEPS:
Causing damage: It has often been seen that the toe of a cricket bat remains in contact with the ground at all times, which is why it deteriorates due to deterioration. If the ground is wet, the toe can absorb moisture and cause more damage than normal. As the wetness is absorbed by the wood and the bat becomes heavy, the cricket bat loses the cushion property to some extent. This makes him weaker when the ball is hit, causing him to spin.
The bat face can absorb moisture from the ball during the game. This will cause rubbing on the surface of the bat which may cause the wood to peel in layers or cause some further damage.
Repair toe cracks: Bat cracks can be repaired with glue and repair tape or twine, and sandpaper and oil. All stickers and sleeve removed, First, locate the crack in the bat and fill it completely with glue, such as wood gum glue or superglue. Remove any excess glue and allow it to dry for 12 to 24 hours.
Then sand the area in front of the bat with a sandpaper between 150 and 250. Oil the repaired area with crude linseed oil.
Tie that area with bat tape or twine.
"Toe" can protect your bat from moisture. Applying protective tape to bats can protect the face and edges of bats from moisture.
Loss from cricket ball: Cricket balls are stiff and the seam in the ball naturally affects and damages the wood surface. A cricket ball can cause considerable damage to the surface of your bat if not properly "experienced" or "knockout". Knock your bat well. Play with old balls for a week or two and bring the bat to fitness. A proper toe can prevent the end of the toe from moving. Also, put protective tape on the edges and face, which will protect the bat from damage.
Repair cracks in face or edge:To recover this type of bat loss. Once you fill the bat crack with glue, cover the bat with two pieces of wood (both sides together) and fasten it with a clamp in place while the glue dries.
After the glue dries, follow the same steps for sanding, oiling, and tapping.
Maybe, if you don't have a clamp to use, cut the strips from the old bat grip and use the bat as a clamp as the elastics.
Reattach the handle: The cricket bat handle can come out of the body, the cricket bat handle is easy to repair. The handle can be re-attached with glue. Cover the handle with wood glue and reinstall it into the body of the bat.
Use a rubber mallet to tap the handle. And remove any excess glue. Pressing tape or bat and holding the handle firmly. Allow the glue to cure for at least 48 hours.
For additional support, insert wooden screws into the body of the bat and maintain the handle through the handle.
Replace the rubber-grip handle:
Immediately replace the cricket bat grip handle when it breaks. After you gently roll the new grip onto the grip cone, tape it to the bat with the help of the grip cone.
Keep the cricket bat dry and cool: Store your cricket bat where it is not too hot and not wet or damp. Never place your bat in a hot car or any other hot area, as it can heat the wood. If the bat ever gets wet, dry it with a cloth and store it in the shade. Till it dries, then apply a thin layer of oil.
Replace the anti-scuff sheet:
At the end of the season, remove the anti-scuff sheet from the cricket bat. Apply a layer of linseed oil and let it soak for 24 hours. Then, apply a second coat of oil and let it rest for a week. Sand it down and repeat the oiling process. Apply a new anti-scuff sheet again.
If you repair your cricket bat in the market then you have to pay a lot of price.
Accessories prices: Toe Guard: - ₹ 250 / - Grip: - ₹ 200 / - Oiling: - ₹ 200 / - Clear Scuff Sheet / Fiber Sheet: - ₹ 200 / - Machine Knocking (8000) Knocks): - ₹ 700 / - Handle / Shoulder Repair: - ₹ 500 / - Rehandle: - ₹ 1000 / - Major Graft: - ₹ 600 / - Face Repair (Hitting Area): - ₹ 700 / -
Sports | Cricket | ODI | Test | T20 | T10 | IPL | G K
Comments
Post a Comment